4. 安装支撑座：将支撑座固定在滑台上，支撑座应该与滚珠丝杠的位置一致,精度等级越高，滚珠丝杠的精度越高,它们可以提高设备的精度和效率，减少运行噪音，延长设备使用寿命，是现代机械工业中不可或缺的重要组成部分, 3. 高速滚珠丝杠：转速在3000rpm以上，适用于需要高速旋转和高精度的应用，例如叉车的升降系统、机器人的关节传动系统等, 6. 驱动电机的制造商和型号：需要根据选定的驱动电机的制造商和型号，对其性能参数进行验证和确认，以确保其能够满足设计要求,这些厂家生产的研磨滚珠丝杠，通常采用高品质的材料和精密的加工工艺，确保产品的质量和性能达到客户的要求,滚珠丝杠自动润滑是一种自动给滚珠丝杠供油的装置，用于保证滚珠丝杠的正常运转和寿命,但具体型号和尺寸可能会因为不同的应用而有所不同, 3. 51300：单向推力球轴承，内径17mm，外径30mm，宽10mm,How to draw a ball screw in Taichung in English: 1. Start by drawing a horizontal line to represent the base or bed of the machine or equipment where the ball screw will be installed. 2. Draw a vertical line at the center of the base line to represent the axis or centerline of the ball screw. 3. Draw a circle at the top of the vertical line to represent the ball nut, which is the component that houses the balls that roll along the screw shaft. 4. Draw a screw thread around the vertical line, starting from the bottom and going up towards the ball nut. The screw thread should be spiraled around the vertical line and should have a constant pitch or distance between each thread. 5. Draw a set of balls inside the ball nut, arranged in a circular pattern and evenly spaced apart. The balls should be in contact with the screw thread and should be able to roll freely along the shaft. 6. Draw two end supports or bearings at each end of the ball screw, which are used to support and guide the screw shaft. The end supports should be cylindrical in shape and should have mounting holes for attaching to the machine frame. 7. Finally, add any additional details or features such as seals, lubrication ports, or covers to complete the drawing.